Codec Tieline ViA Quick Start User Manual page 13

2
3
Browser Wi-Fi Login
Some Wi-Fi networks require a browser to log in and connect to the access point, e.g. hotel Wi-Fi
networks. To log in to this type of network:
1. Press the HOME
Transport Interfaces > Wi-Fi
2. Tap to select the network to which you are connecting.
3. Tap to select Portal Browser to launch a web-browser on the TOUCH SCREEN. Then enter
credentials and/or accept terms as required in the web-browser.
Helpful Hint: Use fingers on the TOUCH SCREEN to pinch zoom in to web-browser
content, or zoom out.
Connecting over Cellular Wireless via USB Modems
1. Attach a supported USB Modem to either USB PORT 1 or USB PORT 2 on the codec. When
the modem is detected by the codec, the network symbol and signal strength is displayed in the
Status Bar on the TOUCH SCREEN. Note: It may take up to 90 seconds for the modem to be
detected by the codec and connect to the network.
© Tieline Research Pty. Ltd. 2020
· Wi-Fi is enabled in the codec, but it is out of range of a Wi-Fi network, or
· The codec is within range of a Wi-Fi network, but is either not connected
or is in the process of connecting
The codec is connected to a Wi-Fi network and signal strength is displayed
button to return to the Home screen, then tap Settings
.
ViA User Manual v3 13
>