Cellular Activation In The Usa; Part V Connection Guide - Codec Tieline ViA Quick Start User Manual

5. Tap Parent Interface to choose the interface from which data will be shared using the Wi-Fi
hotspot.
6. When a device connects successfully the Hotspot
illuminated in the Status Bar in the top right corner of the TOUCH SCREEN.
Helpful Hint: Note the Wi-Fi IP address on the screen when you set up a hotspot and
then enter this IP address in a browser on a device connected to the hotspot, e.g. a
tablet, to view the Toolbox HTML web-GUI for the codec and control the codec.
Important Note: Exercise extreme caution when using the Wi-Fi hotspot feature if
streaming live IP audio simultaneously while this mode is enabled. Sharing data may lead
to less reliable IP connections due to reduced bandwidth being available.
4.1

Cellular Activation in the USA

LTE Activation Notice
Before using a Tieline ViA LTE module in the USA it is necessary to set up a wireless account with
your Telco. Follow the steps in the tech note at the following link to set up a wireless account:
https://www.multitech.com/documents/publications/activation-guides/lte-device-activation-steps-
s000620.pdf
5 Connection Guide
This quick start guide will get you connected with ViA in mono or stereo in just a few minutes.
Configuration features on the Connections screen are as follows:
© Tieline Research Pty. Ltd. 2020
ViA User Manual v3
symbol changes from greyed out to
17