Codec Tieline ViA Quick Start User Manual page 30

30 ViA User Manual v3
9. Tap Direction if you want to save data and configure the codec to either Encode Only or
Decode Only. Note: this can be helpful if connection bandwidth is limited.
10. Tap Name to rename the connection. When all settings have been configured tap Done in
the top right-hand corner of the TOUCH SCREEN.
11. Tap Press to Edit Destination and then enter the IP address, or alphanumeric characters in
the SIP URI for the codec you want to dial, then tap Done in the top right-hand corner of the
TOUCH SCREEN to confirm all settings.
12. Tap the Destination Settings
interface in the Select SIP Interface screen. For a peer-to-peer SIP connection select Any
as the interface with which to dial if you have an Ethernet cable connected to LAN1 or
LAN2.
13. If a SIP Account is registered to the codec, tap to select None as the SIP account when
dialing peer-to-peer, or select a registered SIP account if you are using a SIP server to
establish a connection.
symbol and then tap Via to select a specific dialing
© Tieline Research Pty. Ltd. 2020