Codec Tieline ViA Quick Start User Manual page 22

22 ViA User Manual v3
10. Tap Disconnect
connection.
Adding/Removing a SmartStream PLUS Connection
To add a SmartStream PLUS IP connection for redundancy:
1. Tap the Plus symbol
2. A new connection will appear below the primary connection. Note: By default, each new
SmartStream PLUS connection uses the same IP address as the last configured
connection.
3. Tap the IP address field to edit the IP address of the destination codec being dialed, then tap
Done. Note: Tap IP to display the Address Book
TieLink Traversal Server contact list destination if this is available.
4. Ports are allocated automatically and tap the Destination Settings
interface over which to stream the connection, e.g. LAN, Wi-Fi or Cellular. See
Connection Settings
5. The SmartStream PLUS connection is now configured.
6. Tap the Red Cross symbol
Important Notes:
· Only one SmartStream PLUS connection per audio stream is supported with
uncompressed PCM, or when encoding with aptX Enhanced, G.711 or G.722
algorithms.
· Two SmartStream PLUS connections are supported per audio stream with Music PLUS
encoding.
· Up to three SmartStream PLUS connections are supported per audio stream when
encoding using Tieline Music, AAC algorithms, MP2, MP3 and Opus.
or press the DISCONNECT
to add a SmartStream PLUS connection.
for more details.
to delete a SmartStream PLUS connection.
button to hang up the
symbol and then tap to select a
symbol to select the
© Tieline Research Pty. Ltd. 2020
Other IP