HP 53150A Series Programming Manual page 87

Chapter 3 Programming Your Counter for Remote Operation
Commands for Displaying Results
Commands for Displaying Results
Command for Displaying Raw Results
The following command always causes raw measurement results to be
displayed:
*RST
Commands for Displaying Relative Results
FREQ:OFFS:STAT ON
POW:AC:REF:STAT ON
Commands for Enabling and Disabling the Display
The Counter display can be turned on or off. The normal condition is for
the display to be on.
:DISP:ENABLE OFF
:DISP:ENABLE ON
Programming Guide
Turns off all offsets.
Turns on offsets.
Turns on offsets.
Disable the display, all segments off.
Normal display mode.
3-47