HP 53150A Series Programming Manual page 35

Chapter 2 Command Summary
HP 53150A/151A/152A Command Summary
Table 2-2. HP 53150A/151A/152A SCPI Command Summary (Continued)
Keyword/Syntax Parameter Form
:MEMory
:CLEAr[:NAME] <name>
:DATA <name>, <data>
:DATA? <name>
:NSTates?
:READ
[:SENSe]
:AVERage
[:STATe] <Boolean>
:COUNt <numeric_value>
:CORRection
:CSET
:SELect <character_data>
CORR1 | CORR2 . . . CORR9
:STATe <Boolean>
:DATA? <data_handle>
"[XNONe]FREQuency [1 | 2]"
"[XNONe]POWer [2]"
:FILTer
:FM
:AUTO <Boolean>
Programming Guide
Std/New Comments
Std Subsystem. Manages instrument memory.
Std Event; no query. Restores the frequency
values in the named correction profile to the
default values and sets all loss values to
zero.
Std Stores data in the named correction profile.
Std Queries the data in the named correction
profile.
Std Query only. Returns the number of available
*SAV/*RCL states in the instrument.
Std See Measurement Instructions in this table.
Std Subsystem setup commands.
New Subtree. Configures the averaging function.
New Turns averaging ON and OFF.
New Specifies the number of measurements to
combine when AVERage:STATe is ON.
Std Subtree. Configures the power-correction
function.
Std Selects a power-correction profile.
Std When STATe is ON, power measurements
are modified according to the data in the
correction profile selected with :SELect.
Std Query only. Returns the current
measurement result data of the SENSe
subsystem.
Std Frequency on channel 1 or 2.
Std Power on channel 2.
Std Subtree. Controls the use of filtering
routines in the instrument.
New Turns automatic FM compensation ON or
OFF.
2-15