HP 53150A Series Programming Manual page 36

Chapter 2 Command Summary
HP 53150A/151A/152A Command Summary
Table 2-2. HP 53150A/151A/152A SCPI Command Summary (Continued)
Keyword/Syntax Parameter Form
[:SENSe] (cont.)
:FREQuency
:OFFSet <numeric_value>[frequency unit]
:STATe <Boolean>
:RESolution <numeric_value>[frequency unit]
:TRACking <character_data>
FAST | SLOW | OFF
:FUNCtion
[:OFF] <sensor_function>[,<sensor_function>]
"[XNONe]FREQuency [1 | 2]"
"[XNONe]POWer [2]"
[:ON] <sensor_function>[,<sensor_function>]
"[XNONe]FREQuency [1 | 2]"
"[XNONe]POWer [2]"
:STATe? <sensor_function>
:POWer
:AC
:REFerence <numeric_value>
:STATe <Boolean>
:ROSCillator
:SOURce <character_program_data>
INTernal | EXTernal
2-16
Std/New Comments
.
Std Subtree. Controls the frequency-measuring
capabilities of the instrument.
Std Sets a reference frequency for all other
absolute frequency settings in the
instrument.
New When STATe is ON, frequency
measurements are modified by the value of
FREQ:OFFset.
Std Sets the frequency-measurement
resolution.
New Selects one of three signal-tracking modes.
Std Subtree. Selects the <sensor_function>(s)
to be sensed by the instrument.
New Selects the <sensor_function>(s) to be
turned OFF.
Std Selects the <sensor_function> to be sensed
by the instrument.
Std Query that returns a Boolean value which
indicates whether the specified
<sensor_function> is ON or OFF.
Std Subtree. Configures the instrument for
power measurement on channel 2.
Std Sets a reference amplitude (in dB) for
display of power measurements.
Std Determines whether amplitude is measured
in absolute or relative mode.
Std Subtree. Controls the reference oscillator.
Std Sets the selection of a reference timebase
(INTernal or EXTernal).
Programming Guide