Table of Contents
Advertisement
When Check Digit is set to Validate and Transmit, the scanner only reads Inter-
leaved 2 of 5 bar codes printed with a check digit, and will transmit this digit at the
end of the scanned data. Default = No Check Digit.
Interleaved 2 of 5 Message Length
Scan the bar codes below to change the message length. Refer to
Description
= 2-80. Minimum Default = 4, Maximum Default = 80.
Minimum Message Length
NEC 2 of 5
< Default All NEC 2 of 5 Settings >
NEC 2 of 5 On/Off
N3680 Decoded Engine User Guide
* No Check Digit
Validate and Transmit
(page 76) for additional information. Minimum and Maximum lengths
* On
Validate, but Don't Transmit
Message Length
Maximum Message Length
Off
83
Advertisement
Table of Contents
