Code 128 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
Character Replacements
from the
characters should then appear properly.
GS1-128
<Default All GS1-128 Settings>
GS1-128 On/Off
N3680 Decoded Engine User Guide
on page 180), and scan the value and the Save bar code
Programming Chart
* On
on the inside the back cover of this manual. The data
Code 128 Code Page
Off
ISO 2022/ISO 646
Off
91