Code 39; Code 39 On/Off; Code 39 Start /Stop Characters; Code 39 Check Character - Honeywell N3680 User Manual

Code 39

< Default All Code 39 Settings >

Code 39 On/Off

Code 39 Start /Stop Characters

Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters. Default = Don't Trans-
mit.

Code 39 Check Character

No Check Character indicates that the scanner reads and transmits bar code data
with or without a check character.
When Check Character is set to Validate, but Don't Transmit, the unit only reads
Code 39 bar codes printed with a check character, but will not transmit the check
character with the scanned data.
N3680 Decoded Engine User Guide
* On
Transmit
Maximum Message Length
Off
* Don't Transmit
79