Chapter 9 - Serial Programming Commands; Conventions - Honeywell N3680 User Manual

CHAPTER
9
SERIAL PROGRAMMING
COMMANDS
The serial programming commands can be used in place of the programming bar
codes. Both the serial commands and the programming bar codes will program the
scan engine. For complete descriptions and examples of each serial programming
command, refer to the corresponding programming bar code in this manual.
The device must be set to an RS232 interface (see
mands can be sent via a PC COM port using terminal emulation software.

Conventions

The following conventions are used for menu and query command descriptions:
parameter
[option]
{Data}
bold
N3680 Decoded Engine User Guide
A label representing the actual value you should send as part of a command.
An optional part of a command.
Alternatives in a command.
Names of menus, menu commands, buttons, dialog boxes, and windows that
appear on the screen.
page 7). The following com-
143