Code 93 On/Off; Code 93 Message Length; Code 93 Append - Honeywell N3680 User Manual

Code 93 On/Off

Code 93 Message Length

Scan the bar codes below to change the message length. Refer to
Description
= 0-80. Minimum Default = 0, Maximum Default = 80.
Minimum Message Length

Code 93 Append

This function allows the scanner to append the data from several Code 93 bar
codes together before transmitting them to the host computer. When this function
is enabled, the scanner stores those Code 93 bar codes that start with a space
(excluding the start and stop symbols), and does not immediately transmit the
data. The scanner stores the data in the order in which the bar codes are read,
deleting the first space from each. The scanner transmits the appended data when
it reads a Code 93 bar code that starts with a character other than a space. Default
= Off.
N3680 Decoded Engine User Guide
* On
(page 76) for additional information. Minimum and Maximum lengths
On
Off
Message Length
Maximum Message Length
* Off
85