Registration Of New Projector - Barco DP2K-19B Installation Manual

9. Projector registration
9.3

Registration of new projector

Possible login types
A projector can be registered by the following persons, each with its own login:
• installer
• owner
• Installer/owner
Depending on your login type, some steps are not necessary in the registration procedure. Follow the wizard as displayed on the
screen. The procedure below gives an overview of all possible steps which can be displayed.
How to register
1. Go to Barco's Partnerzone on https://my.barco.com.
2. Login into the partnerzone.
If you are not yet registered, click on Sign in here and follow the instructions. With the created login and password, it is possible
to enter the partnerzone where you can upload the certificate.
When your login is correct, the digital cinema partnerzone start page is displayed.
Click Registration DC projector and select Register a new DC projector. The first registration page will be displayed.
Image 9-2
Start registration
3. Click Browse to locate the certificate file. Select the file and click Open.
The file is filled out next to XML file. Click >> Next to continue.
Some checks are done on the certificate file. When the file is correct and not yet uploaded, the next registration page is displayed.
4. Fill out the Technical Data page.
74 R5905067 DPXK-19B/23B/P 17/09/2012