M
Image 7-4
Mount touch panel
3. Place the touch panel interface on the mounting plate of the swivel arm and fasten the two wing nuts (W) as illustrated.
Image 7-6
Mount touch panel
4. Connect the circular plug of the multi cable with the circular socket at the rear side of the B-series projector.
Image 7-7
5. Attach the multi cable to the swivel arm using the two Velcro strips.
6. Connect the DC plug, the RJ45 Ethernet plug and the D-SUB plug into their respective sockets on the touch panel interface.
R5905067 DPXK-19B/23B/P 17/09/2012
Image 7-5
Touch panel mounted
W
7. Communicator Touch Panel
69