CYP CPLUS-V4H1H Operation Manual page 11

Command
ECHO N1
ECHO ?
INNAME N1 N2
INNAME ?
OSDTIMEOUT N1
OSDTIMEOUT ?
OSDSHOW N1
OSDSHOW ?
FADEFAULT
VER
REBOOT
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.
Description and Parameters
Enable or disable the console's text echo mode.
Available values for N1:
0
1
Show the current state of the console's text echo
mode.
Set the name for Input N1.
N1 = 1~4 [Input number]
N2 = {name}
Show the names of all inputs.
Set the OSD timeout length.
N1 = 0~60
Show the current OSD timeout length.
Set the OSD information display behavior.
Available values for N1:
0
1
2
Show the current OSD information display behavior
setting.
Reset all settings to the factory defaults.
Show the unit's current firmware version.
Reboot the unit.
[Off]
[On]
[16 chars max]
[Seconds]
[Off]
[Timeout]
[Always on]
6