Table of Contents
Advertisement
Selecting items with the arrow keys
(1)
While a "Menu" is open, press the [◀] or [▶] button to select, highlight, and move an
item. Move to the item you want, press the [ENT] key to set the item.
The [◀] key moves to the previous item (upper) and the [▶] key moves to the next
(lower) item.
A pull down list opens, depending on the item.
(2)
To select a value or item that you want to select from a pull down list, use the same
procedure as in step (1) to select it and set it.
(3)
If you press the [CNCL] key in step (2), the selection is cancelled and changes to the
previously selected item.
(4)
Press the [ENT] key to set the selected value.
(5)
The setting is reflected on the screen while the selection is selected, depending on
the menu item.
(6)
When changing an item that you just selected that is still selected, pressing the
[ENT] key opens alternative input menus.
(7)
Pressing the [MULTI] knob does the same operation as the [ENT] key.
Example of moving with the arrow keys
Example of moving inside a selection
Precautions
Move the cursor out of the menu frame when doing a sequence of
operations using the [▶] or [◀] keys. The cursor position has priority if it is
inside the frame.
Press the [▶] key three
times to move to item 4.
[V BEAM].
3-19
Pressing the [ENT] key
opens the selection menu.
In the selection window,
every time you press the [▶]
key the selection moves
down. Every time you press
the [◀] key the selection
moves up.
3 Operating procedures
3
Advertisement
Table of Contents
