Table of Contents
Advertisement
6.1.3.4 Replaying Screens
Screens are not displayed as is, even if you replay them from the screen memory or the from
the screen memory on the card.
To display them, you need to set the replay display settings to "On".
Operating Procedure
settings
6
6 Operation Settings
Press the keys "8 → 1 → 3 → 4" to go to REPLAY
Press the [MENU] key to open the menu.
Turn the [MULTI] knob to move to "OPERATION".
Press the [MULTI] knob to open the submenu.
Turn the [MULTI] knob to move to "MODE SET".
Press the [MULTI] knob to open the submenu.
Turn the [MULTI] knob to move to the "3. SCREEN
MEMORY" menu. Press the [MULTI] knob to open the
"3. SCREEN MEMORY" submenu.
Turn the [MULTI] knob to select "4. REPLAY
SCREEN".
Press the [MULTI] knob. Turn the [MULTI] knob to
"REPLAY SCREEN" from the pulldown menu. Select
"2. REPLAY" by pressing the [MULTI] knob.
The selection is set, and items 1 to 3 on the "SCREEN
MEMORY" menu are masked and cannot be selected.
To replay other image data in the memory, first set "4.
REPLAY SCREEN" to "Off".
During "REPLAY SCREEN" the "REPLAY" message is
displayed as shown in the diagram on the left.
6-8
Advertisement
Table of Contents
