Table of Contents
Advertisement
In order from the left, adjust the color, saturation, and brightness of the color pattern settings to
create the colors. At first, the border moves to the "COLOR" of "LEVEL 1" in the diagram to the
left. Next, each time you press the [MULTI] knob, the border moves to [SATURATION], to
[BRIGHTNESS], and then to [LEVEL]. If you are changing to the next level, turn the [MULTI] knob
to change the level. Press the [MULTI] knob to move to the [COLOR] of the level that you set.
6
The diagram to the right is an example in which you have moved to the 32nd color setting.
The white border moves at the same time.
The initial display color settings are described in section 12.2 Setting the Colors of the Sonar
Display, in this instruction manual.
6 Operation Settings
6-80
Advertisement
Table of Contents
