JRC JFS-280 Instruction Manual page 167

Scanning sonar
Hide thumbs Also See for JFS-280:
Table of Contents

Advertisement

Displayed in red
1. If the ship's speed exceeds 16
knots, the ship's speed display turns
red.
2. "UP" appears in the middle of the
screen. At the same time, the
hoisting
sounding and storage operations
start after two seconds. As soon as
the buzzer sounds, move away from
the hoisting device.
3. After a few seconds storage is complete and the
hoisting device's buzzer turns off, and a storage
complete message appears on screen.
4. It is not possible to do extension operations until the
ship's speed is below the set speed. Also, the ship's
speed continuous to be displayed in red.
Storage starts 2 seconds after "UP" is displayed
Storage complete
The storage complete display appears on the screen.
When the ship's speed falls below the set value, the
ship's speed display changes to its normal color.
Extension is now possible.
6-19
device
buzzer
starts
6 Operation Settings
6

Advertisement

Table of Contents
loading

Table of Contents