Table of Contents
Advertisement
6.2.4 Off Center Function
You can move your own ship's position from the center of the screen to a position that is up to
3/4 of the maximum setting range.
There are three types of off center settings. You can set these operations by long pressing the
[OFF CENT] key while this menu is open.
Operating Procedure
settings
6
For information about off center operations, refer to section "4.1.7 Off Center" in section 4.
6 Operation Settings
Press the keys "8 → 2 → 4" to go to OFF CENTER
Open the "DISPLAY MODE" menu. Turn the [MULTI]
key to select "4. OFF CENTER".
Press the [MULTI] key to display the pulldown menu.
Two types of menu are displayed, "1. CURSOR" and
"2. MEMORY POINT".
Turn the [MULTI] key to select the off center you want
to use. Press the [MULTI] key to set it.
6-28
Advertisement
Table of Contents
