Table of Contents
Advertisement
7.2.2.10 Direction Mark Settings
Operating Procedure
DIRECTION MARK settings
7.2.2.11 Lat/Lon Settings
Operating Procedure
settings
7
7.2.2.12 Wake Settings
Operating Procedure
LINE settings
7 Other Items
Press the keys "9 → 1 → 2 → 2 → 3" to go to
In the [SENSOR SET] menu, turn the [MULTI] knob to
select "3. DIRECTION MARK". Press the [MULTI] knob
to display the pulldown menu.
Select from "1. COMPASS" to "2. GYRO I/F".
Example: From the previous input sensor connection
Turn the [MULTI] knob to select "1. COMPASS". Press
the [MULTI] knob to accept.
Press the keys "9 → 1 → 2 → 2 → 4" to go to LAT/LON
In the [SENSOR SET] menu, turn the [MULTI] knob to
select "4. LAT/LON". Press the [MULTI] knob to display
the pulldown menu.
Select from "1. COMPASS" to "2. GPS".
Example: From the previous input sensor connection
Turn the [MULTI] knob to select "1. COMPASS". Press
the [MULTI] knob to accept.
Press the keys "9 → 1 → 2 → 2 → 5" to go to TRACK
In the [SENSOR SET] menu, turn the [MULTI] knob to
select "5. TRACK LINE". Press the [MULTI] knob to
display the pulldown menu.
Select from "1. CURRNT" to "4. GYRO I/F".
Example: From the previous input sensor connection
Turn the [MULTI] knob to select "1. CURRNT". Press
the [MULTI] knob to accept.
Precaution) Selecting "1. CURRNT" in "TRACK LINE"
draws form the track line relative to water and the
direction mark.
7-12
Advertisement
Table of Contents
