Table of Contents
Advertisement
7.2.2.1
Input Settings
This is a menu for setting how to use sensors that are connected and sensors to be connected.
Operating Procedure
7.2.2.2
Compass Settings
Operating Procedure
settings
7.2.2.3
Depth/Temp Settings
Operating Procedure
DEPTH/TEMP settings
Press the keys "9 → 1 → 2 → 1" to go to INPUT settings
In the [SENSOR SETTINGS] menu, turn the [MULTI]
knob to select "1. INPUT". Press the [MULTI] knob to
display the submenu.
Select from the following submenus and do the
settings.
"1. COMPASS"
"2. DEPTH/TEMP"
"3. CURRENT"
"4. GPS"
"5. LOG"
Press the keys "9 → 1 → 2 → 1 → 1" to go to COMPASS
In the [INPUT] menu, turn the [MULTI] knob to select
"1. COMPASS". Press the [MULTI] knob to display the
pulldown menu.
Select from "1. OFF" to "5. NAV4".
Confirm and set the input terminal that is connected to
the terminal board.
Normally, turn the [MULTI] knob to select "2. NAV1".
Press the [MULTI] knob to accept.
Press the keys "9 → 1 → 2 → 1 → 2" to go to
In the [INPUT] menu, turn the [MULTI] knob to select
"2. DEPTH/TEMP ". Press the [MULTI] knob to display
the pulldown menu.
Select from "1. OFF" to "5. NAV4".
Confirm and set the input terminal that is connected to
the terminal board.
Normally, turn the [MULTI] knob to select "4. NAV3".
Press the [MULTI] knob to accept.
7-9
7
7 Other Items
Advertisement
Table of Contents
