Table of Contents
Advertisement
6.1.3.2 READ FILE
You can display the screen data that you saved to the memory card.
Operating Procedure
settings
6
Precaution: To display the screen data that was read, you need to press the menu number
→
keys "8
6 Operation Settings
Press the keys "8 → 1 → 3 → 2" to go to READ FILE
→
→
1
3
4" and set "REPLAY" to "On". Refer to the "REPLAY" section.
Press the [MENU] key to open the menu.
Turn the [MULTI] knob to move to "OPERATION".
Press the [MULTI] knob to open the submenu.
Turn the [MULTI] knob to move to "MODE SET".
Press the [MULTI] knob to open the submenu.
Turn the [MULTI] knob to move to the "3. SCREEN
MEMORY" menu. Press the [MULTI] knob to open the
"3. SCREEN MEMORY" submenu.
Turn the [MULTI] knob and select "2. READ FILE".
While the recorded screen data is being written, the
name of the file that is being written is displayed as
shown in the diagram on the left.
In the example in the diagram on the left, two files have
been saved.
The file names list the last two digits of the year, the
month, date, hour, minutes, and seconds, in that order.
We know that the file in the diagram on the right was
the screen data saved on March 12, 2016, at 3:40:04.
When you find a file with the date that you want to
read, turn the [MULTI] knob to move to that file.
Pressing the [MULTI] knob displays the pulldown
menus "1.STOP" and "2. REPLAY DISPLAY", so turn
the [MULTI] knob to move to "2. REPLAY DISPLAY".
Press the [MULTI] knob to select it.
If the reading is completed successfully, "READ OK"
appears on the screen as shown in the diagram on the
left.
6-6
Advertisement
Table of Contents
