Table of Contents
Advertisement
●
How to operate the items registered to the [MULTI] knob
When you turn the [MULTI] knob, while "MENU" is closed, the items registered to the [MULTI] knob
appear in their registered order. (If only one item is registered, it does not change.)
When the item you want to operate appears in the registered items, press the [MULTI] knob. The set
value and the current value appear in the center of the screen and in the [MULTI] knob registered items.
Turn the [MULTI] knob to set a value. If the value that was set and the set value are acceptable, press
the [MULTI] knob to accept them.
Press the [MULTI] knob to set "STC LEVEL" to "2. MULTI
No. 2".
(Registration is not yet complete)
Turn the [MULTI] knob to move to "9. SET" and press the
[MULTI] knob to complete registration.
Press the [MENU] key to close the menu.
Registration is complete if when you turn the [MULTI] knob,
while "MENU" is closed, the display has changed so that
the items registered to the [MULTI] knob appear in order
"CLUTTER" → "STC LEVEL".
The procedure to adjust "STC LEVEL", which was
registered using the [MULTI] knob, is noted below.
Turn the [MULTI] knob to select "STC LEVEL".
Press the [MULTI] knob. The display changes and the
currently set value appears. It also appears in the center of
the screen.
4-23
4
4 Operations
Advertisement
Table of Contents
