Table of Contents
Advertisement
7.2.2.7
Sensor Set Settings
This is a menu for selecting sensors connected to such displays as course, speed, and
direction mark.
Operating Procedure
settings
7.2.2.8
Course Settings
Operating Procedure
settings
7.2.2.9
Speed Settings
Operating Procedure
settings
Press the keys "9 → 1 → 2 → 2" to go to SENSOR SET
In the [SENSOR SETTINGS] menu, turn the [MULTI]
knob to select "2. SENSOR SET". Press the [MULTI]
knob to display the submenu.
Select from the following submenus and do the
settings.
"1. COURSE"
"2. SPEED"
"3. DIRECTION MARK"
"4. LAT/LON"
"5. TRACK LINE"
Press the keys "9 → 1 → 2 → 2 → 1" to go to COURSE
In the [SENSOR SET] menu, turn the [MULTI] knob to
select "1. COURSE". Press the [MULTI] knob to
display the pulldown menu.
Select from "1. COMPASS" to "4. LOG".
Example: From the previous input sensor connection
Turn the [MULTI] knob to select "1. COMPASS". Press
the [MULTI] knob to accept.
Press the keys "9 → 1 → 2 → 2 → 2" to go to SPEED
In the [SENSOR SET] menu, turn the [MULTI] knob to
select "2. SPEED". Press the [MULTI] knob to display
the pulldown menu.
Select from "1. CURRNT" to "4. GYRO I/F".
Example: From the previous input sensor connection
Turn the [MULTI] knob to select "1. CURRNT". Press
the [MULTI] knob to accept.
7-11
7
7 Other Items
Advertisement
Table of Contents
