Installation
3.1
Introduction
The use of damaged devices may result in death, serious injury, or property damage.
Do not install or start up damaged devices.
Installation location
The PAC2200 device is mounted on a TH35 rail (complying with EN 60715) and is intended
for installation in permanently installed systems, control cabinets or fuse boxes.
Note
Avoid condensation
Sudden fluctuations in temperature can lead to condensation. Condensation can affect the
function of the device. Store the device in the operating room for at least two hours before
commencing installation.
PAC2200
Equipment Manual, 12/2019, L1V30415167B-03
WARNING
3
39