Warranty - Siemens SENTRON 7KM PAC2200 Product Manual

7.5

Warranty

Procedure
Note
Loss of warranty
If you open the device, you will invalidate the Siemens warranty. Only the manufacturer is
permitted to carry out repairs to the devices. Return faulty or damaged devices to Siemens
for repair or replacement.
If the device is faulty or damaged, proceed as follows (only during the warranty period):
1. Uninstall the device; refer to section Removal (Page 40).
2. Pack the device in a suitable manner to prevent it from being damaged during transport.
3. Return the device to Siemens. You can obtain the address from:
– Your Siemens sales partner
– Technical Assistance
Note
The contents of this manual shall not become part of or modify any prior or existing
agreement, commitment, or contractual relationship. All Siemens obligations derive from the
respective sales contract, which also contains the complete and exclusive warranty
agreement. These contractual warranty requirements are neither extended nor restricted by
the implementation of this Operating Manual.
See also
Latest information (Page 7)
Disposal of waste electronic equipment
Waste electronic equipment must not be disposed of as unsorted municipal waste, e.g.
household waste. When disposing of waste electronic equipment, the current local
national/international regulations must be observed.
PAC2200
Equipment Manual, 12/2019, L1V30415167B-03
Service and maintenance
7.5 Warranty
81