Connecting With A Plc By Mitsubishi Electric Corporation; Fx Series; 4.11 Connecting With A Plc By Mitsubishi Electric; Corporation - NAiS GT10 Technical Manual

Connecting and Communicating with the PLC
4.11

Connecting with a PLC by Mitsubishi Electric Corporation

4.11 Connecting with a PLC by Mitsubishi Electric

Corporation

4.11.1

FX Series

FX series of PLCs by
Mitsubishi Electric
Corporation
Making connections
CPU Adaptor
FX1N FX1N - 232- BD
FX2N FX2N - 232- BD
* Be aware that communication will not be possible if the above adaptor cannot be
connected to the FX series.
Setting the communication conditions
Setting the communication conditions for the GT main unit
The following settings should be entered for the COM port communication condition
settings.
Item
Communication speed setting
Data length
Parity check
Stop bits
Setting the communication conditions for the PLC
"0" should be stored in D8120. ("0" is the default value, so this setting should not need
to be entered by the user.)
68
Adaptor
Wiring diagram
Mitsubishi PLC adaptor side
Abbreviation
Pin no.
1 CD
2 RD
3 SD
4 4 ER ER
5 SG
6 DR
7
8
9
Value Set
9600 bits/s
7 bits
Yes, Even
1 bit
GT10
GT30
GT series
GT10/GT30
GT main unit side
Abbreviation
Pin no.
SD SD
RD RD
RS RS
CS CS CS CS
GND GND
GT10/GT30