NAiS GT10 Technical Manual page 26

An Overview of GT10 Functions
Ultra - thin body is only 32 mm/1.26 inch deep
The in - panel depth is a mere 32 mm/1.26 inch (including the fittings), configuring an
ultra - thin body and taking up a bare minimum of space.
Through function is convenient for debugging
If connections are made as shown in the diagram, a convenient "through" function makes
it possible to transfer data from the GT10 and carry out PLC debugging at the same time
that communication is going on between the GT10 and the FP series PLC. This
significantly boosts efficiency in the workplace.
PLC
The FPWIN GR and NPST - GR can
be booted on the computer being
used to edit GT series screens, and
PLC programs edited and monitored
through the GT series.
Maintenance is easier than ever before
LEDs are used for backlighting, eliminating the fuss and bother of replacement. Screen
data is saved to an F - ROM, while other data is backed up by an internal secondary
battery, so no battery replacement is needed. This assures long- term, stable use without
worrying about lost data.
xxiv
32
Cable connected to
COM or TOOL port
of PLC
PLC debugging
/1.26
mm
GT10/GT30
Screen
Screen data
transfer
being sent
cable
and received
AFC8503
Screen creation tool GTWIN
FP series programming tool
FPWIN GR
Personal computer
GT10/GT30
inch