Connecting and Communicating with the PLC
4.1
Connecting the FPΣ
CAUTION
Because loose wiring is used for connection to the FPΣ COM. port, no
dedicated cable is available. The cable should be provided by the
customer. When purchasing a cable, the following precautions should
be observed:
•
Shielded wire with a size of AGW#28 to 16 (conductor cross - section
surface area: 0.08 mm
•
For wiring procedures, please refer to "Wiring the COM. Port" on
page 26.
48
2
2
to 1.25 mm
) should be used for connections.
GT10/GT30