NAiS GT10 Technical Manual page 65

GT10/GT30
Explanation of this function
•
"IOP01" mode
The GT10 is equipped with an IOP01 mode for users with
conventional models (I.O.P. B01C / M01L / D01TL series).Using this
function enables compatibility with earlier models, so that
communication is possible between the GT10 and PLC, except for
one part of the basic communication area.
•
Entering settings for the IOP01 mode
Click on the "File" menu in GTWIN, and then select "Configuration"
from the displayed menu. Next, select "GT Configuration" from the
sub - menu. Turn on the radio button for "IOP01 Mode" in the
displayed dialog box.
For information on the displayed dialog box, please see "Basic
Setup" under "GT10 Configuration Settings" on page 81.
3.2 Setting the Basic Communication Area Between the GT10 and PLC
Setup
37