GT10/GT30
Settings in GTWIN
Select "Configuration" under "File" on the menu bar, and then select the sub - menu
called "GTWIN Configuration". This displays the dialog box for the GT30 Basic Setup,
as shown below.
Clicking on the
settings dialog box shown below, where the initial addresses for the word area and bit
area can be changed.
GT30 Configuration
Explanation of this function
Key operation in the Device Settings dialog box
Click on the
the device for which settings are to be entered. Use the ten - keys to
enter the address.
The
and the
3.4 Setting the Basic Communication Area Between the GT30 and PLC
button in "Basic Communication Area to PLC" displays the device
Basic Setup dialog box
button to display a pull - down menu, and then select
button acts as a backspace key when entering an address,
button functions as a Clear key.
Setup
43