NAiS GT10 Technical Manual page 115

GT10/GT30 GT10 Configuration Settings
5.2 Entering Configuration Settings from GTWIN Screen Creation Tool
Auto - paging settings
If "On" is selected for auto - paging, and the [Setup] button is clicked, a dialog box
containing the following auto - paging settings is displayed.
Clicking on the button for "Screen No.", "Time", or "Jump to" displays a "Value Set"
dialog box. Set the value and click the [Save] button to save values one at a time.
Screen No. - - - This specifies the screen targeted for auto - paging.
Time - - - This specifies the time for which the screen specified above is displayed. The
setting range is from 1 to 255 seconds.
Jump to - - - This specifies the number of the next screen to be displayed.
[Return] - - - This completes the auto - paging settings and returns to the
"Auto - Paging" dialog box.
[Delete] - - - This deletes screens registered for auto - paging.
[Save] - - - This saves the settings for the screen number, time, and jump destination
as auto - paging settings.
87