Wheel Bearings Inspection; Front Fork Inspection - Triumph Rocket 3 TFC 2020 Owner's Handbook Manual

Wheel Bearings Inspection

Warning
Riding with worn or damaged front
or rear wheel bearings is dangerous
and may cause impaired handling and
instability leading to an accident.
If in doubt, have the motorcycle
inspected by an authorised Triumph
dealer before riding.
Note
If the wheel bearings in the front or
rear wheel allow play in the wheel hub,
are noisy, or if the wheel does not turn
smoothly, have your authorised Triumph
dealer inspect the wheel bearings.
The wheel bearings must be inspected
at the intervals
scheduled maintenance chart.

Front Fork Inspection

Warning
Riding the motorcycle with defective
or damaged suspension is dangerous
and may lead to loss of control and an
accident.
specified in the
Warning
Never attempt to dismantle any part
of the suspension units
All suspension
pressurised oil.
Skin and eye damage can result from
contact with the pressurised oil.
Inspecting the Front Forks
To inspect the forks:
• Position the motorcycle on level
ground.
• While holding the handlebars and
applying the front brake, pump the
forks up and down several times.
• If roughness or excessive stiffness
is detected, consult your authorised
Triumph dealer.
• Examine each fork for any sign of
damage, scratching of the slider
surface, or for oil leaks.
• If any damage or leakage is found,
consult an
dealer.
Maintenance
units contain
authorised Triumph
135