Stopping The Engine; Starting The Engine - Triumph Rocket 3 TFC 2020 Owner's Handbook Manual

How to Ride the Motorcycle

Stopping the Engine

1
N
Trip 1
0 0 0 7 4 8 2
mi
1. Neutral indicator light
2. Engine stop switch - STOP position
3. Master ignition switch - OFF position
(if fitted)
To stop the engine:
• Close the throttle completely.
• Select neutral.
• Place the engine stop switch in the
STOP position.
• Turn the master ignition switch to
the OFF position (if fitted).
• Select first gear.
• Support the motorcycle on a firm,
level surface with the side stand.
• Lock the steering.
Do not leave the ignition switched
on with the engine stopped. This will
cause electrical damage.
94
2
Caution

Starting the Engine

3
1
1. Master ignition switch (if fitted)
2. Engine start/stop switch - QUICK START
position
3. Neutral indicator light
To start the engine:
• Make sure that the master ignition
switch (if fitted) is turned to the ON
position, see page 64.
• Pull the clutch lever fully into the
handlebar.
• Press and hold the QUICK START
position on the engine start/stop
switch until the engine starts.
• Make sure that the transmission is
in neutral.
The motorcycle is equipped with starter
lockout switches. The switches prevent
the electric starter from operating when
the transmission is not in neutral with
the side stand down.
If the side stand is extended whilst the
engine is running, and the transmission
is not in neutral then the engine will
stop regardless of clutch position.
2 3
N
Trip 1
0 0 0 7 4 8 2
mi