Rider And Passenger Seat - Triumph Rocket 3 TFC 2020 Owner's Handbook Manual

To remove the rider seat:
• Insert the ignition key into the seat
lock and turn it anticlockwise while
pressing down on the rear of the
seat.
• This will release the rider seat from
its lock.
• Lift the seat up from the rear, and
slide the seat rearwards to remove
it from the motorcycle.
3
4
1. Locating peg
2. Locating peg lock
3. Seat bracket
4. Fuel tank hinge
To install the rider seat:
• Position the seat's front bracket
under the fuel tank hinge.
• Align the locating peg to the lock.
• Press the seat down engaging the
locating peg in the lock. An audible
click can be heard when the seat is
fully engaged.
1
2
General Information

Rider and Passenger Seat

Warning
To prevent detachment of the seat
during riding, after fitting always
grasp the seat and pull firmly upwards.
If the seat is not correctly secured in
the lock, it will detach from the lock.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
The rider and passenger seats are
joined together to form one seat for
ease of removal and installation.
To remove the rider and passenger seat:
• Insert the ignition key into the seat
lock and turn it counterclockwise
while pressing down on the rear of
the seat.
• This will release the seat from its
lock.
• Lift the seat up from the rear, and
slide the seat rearwards to remove
it from the motorcycle.
3
4
1. Locating peg
2. Locating peg lock
3. Seat bracket
4. Fuel tank hinge
1
2
83