Throttle Control - Triumph Rocket 3 TFC 2020 Owner's Handbook Manual

If the DRL switch is in the dip beam
position, press the high beam button to
switch the high beam on. Each press of
the button will swap between dip and
high beam.
Note
A lighting on/off switch is not fitted to
this model. The rear light and licence
plate light all function automatically
when the ignition is turned to the ON
position.
The headlight will function when the
ignition is turned on and the engine is
running.
Models without Daytime Running
Lights (DRL)
Press the high beam button to switch
the high beam on. Each press of the
button will swap between dip and high
beam.
Note
A lighting on/off switch is not fitted
to this model. The position light, rear
light and licence plate light all function
automatically when
turned to the ON position.
The headlight will function when the
ignition is turned on and the engine is
running.
the ignition is
General Information

Throttle Control

1. Throttle open position
2. Throttle closed position
3. Cruise control cancel position
This Triumph model has an electronic
throttle twist grip to open and close
the throttle via the engine control unit.
There are no direct-acting cables in the
system.
The throttle grip has a resistive feel to
it as it is rolled rearwards to open the
throttle. When the grip is released it will
return to the throttle closed position
by its internal return spring and the
throttle will close.
From the closed position, the throttle
twist grip can
3 - 4 mm to deactivate
control (see page 72).
There are no user adjustments for the
throttle control.
If there is a malfunction with the
throttle control
Indicator Light
illuminated and one of the following
engine conditions may occur:
• MIL illuminated, restricted engine
RPM and throttle movement
3
2
1
be rolled forward
the cruise
the Malfunction
(MIL) becomes
69