Triumph Rocket 3 TFC 2020 Owner's Handbook Manual page 52

Instruments
The engine speed threshold can be
defined and reset, and the gear shift
indicator can be disabled. Once the
engine has been run in (at 1,000 miles),
the Running In option is replaced with a
Default option.
From the Shift Indicator menu, push the
joystick down to select User Defined
and press the joystick centre to confirm.
To adjust the engine speed threshold
(RPM) for the gear shift indicator:
• Push the joystick left/right to select
each individual number.
• Push the joystick
change the number.
• Press the joystick centre to confirm
selection.
• Repeat this
individual number until the correct
RPM number is shown.
To reset the gear shift indicator:
• Push the joystick down/up to select
Reset and press the joystick centre
to confirm. This resets the RPM to
07000.
52
down/up
process with each
Display Setup - Rider Name
This menu allows the rider name to
be entered in to the instrument panel
system and shown in the welcome/start
up display screen.
To enter a rider's name:
• From the Display Setup menu, push
the joystick down to select Rider
Name and press the joystick centre
to confirm.
• Using the joystick, navigate the
keyboard and select the first letter
of the rider's name. Press the
to
joystick button to confirm. The letter
appears at the top of the keyboard.
• Repeat the procedure until the
whole rider name has been selected.
There is a character limit of 13
characters.
• Selecting
keyboard of symbols and numbers
to select from.
• Once the rider's name has been
completed, select Enter and click on
the joystick button to confirm.
• The rider's name will now appear on
the welcome screen the next time
the instruments are started.
?123 shows a new