Rear Suspension Compression Damping Adjustment - Triumph Rocket 3 TFC 2020 Owner's Handbook Manual

Rear Suspension Compression
Damping Adjustment
The compression
is located at the bottom of the rear
suspension unit on the right hand side
of the motorcycle.
1. Compression damping adjuster
To change the compression damping
setting:
• Insert a flat head screwdriver into
the slotted compression damping
adjuster.
• Rotate the compression damping
adjuster clockwise to increase, or
anticlockwise to decrease.
• Always count
anticlockwise turns from the fully
clockwise position.
damping adjuster
1
the number of
Bank Angle Indicators
Warning
Use of a motorcycle with bank angle
indicators worn beyond the maximum
limit will allow the motorcycle to be
banked to an unsafe angle.
Banking to an unsafe angle may cause
instability, loss of motorcycle control
and an accident.
Bank angle indicators are located on the
rider's footrests.
1. Bank angle indicator
Regularly check
indicators for wear.
Bank angle indicators must be replaced
when they have reached the maximum
wear limit of 5 mm in length.
Maintenance
the bank angle
139