Triumph Rocket 3 TFC 2020 Owner's Handbook Manual page 49

Trip Setup - Automatic Reset
This menu allows the automatic reset of
a trip meter after the ignition has been
switched off for a set time.
To set the trip meters to automatically
reset:
• Push the HOME button to display
the Main Menu.
• Push the joystick down and then
press the joystick centre to select
Trip Setup.
• Push the joystick down/up and then
press the joystick centre to select
Trip 1 Reset or Trip 2 Reset.
• Push the joystick down/up and
select Automatic and then press the
joystick centre.
• Push the joystick down/up to select
the required timer setting and press
the joystick centre to confirm the
required time limit. The required
time limit is then stored in the trip
memory.
When the ignition is turned off, the
trip meter is set to zero when the time
period has elapsed.
The following table shows two examples
of the automatic trip reset functionality.
Ignition Selected
Turned Off Time Delay
10:30 hrs 4 Hrs
18:00 hrs 16 Hrs
Trip 2 Enable/Disable
This menu allows Trip 2 meter to be
enabled or disabled. If Trip 2 is disabled
it will no longer be shown in the
instrument display.
To enable or disable the Trip 2 meter:
• Push the MODE button to display
the Main Menu.
• Push the joystick down to select Trip
Setup.
• Push the joystick centre to display
the Trip Setup menu.
• Push the joystick down/up to scroll
to the Trip 2 Display and press the
joystick centre.
• Push the joystick down/up to scroll
between Enabled and Disabled and
press the joystick centre.
Instruments
Trip Meter
Resets to
Zero
14:30 hrs
10:00 hrs
(next day)
49