Abs Warning Light - Triumph Rocket 3 TFC 2020 Owner's Handbook Manual

How to Ride the Motorcycle
Warning
Always ride within the legal speed limit.
Never ride without due care and
attention and always reduce speed in
consideration of weather, surface and
traffic conditions.
Take care when cornering.
If the motorcycle is leaning in a
corner and the ABS is activated, the
optimised cornering
the lean angle measurement from a
sensor to apply the ABS in a suitable
method to assist the rider to maintain
motorcycle control.
cornering ABS will not however be
able to fully counteract the weight
and momentum of the motorcycle and
braking too hard whilst cornering may
result in loss of motorcycle control and
an accident.
Under some circumstances
possible that a motorcycle equipped
with optimised cornering ABS may
require a longer stopping distance
than an equivalent motorcycle without
ABS, or an equivalent motorcycle
equipped with ABS but not equipped
with optimised cornering ABS.
102
ABS will use
The optimised
it is
Warning
If the optimised cornering ABS is not
functioning, the ABS warning light will
illuminate and a warning message is
shown in the display.
In this situation, the ABS will continue
to operate but without the optimised
cornering function, provided that:
- There are no other ABS faults
- The ABS has not been disabled by
the rider.
Do not continue to ride for longer than
is necessary with the warning light
illuminated. In the event of a fault,
contact an authorised Triumph dealer
as soon as possible to have the fault
checked and rectified.
In this situation, braking too hard
during cornering may result in loss of
motorcycle control and an accident.

ABS Warning Light

When the ignition switch is
turned to the ON position, it is
normal for the ABS warning
light to flash on and off.
If the ABS warning light is constantly
illuminated it indicates that the ABS
function is not available because the
ABS has a malfunction that requires
investigation.
If the ABS warning light becomes
illuminated while riding, it indicates that
the ABS has a malfunction that requires
investigation. A warning message may
be shown in the display.