2
2.1
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - e.mail: info@ctiautomation.net
Parameter setting
•
The parameter setting of the controller is used to adapt the drive to your applications.
•
The complete parameter set is organized in codes which are consecutively numbered and
always begin with "C".
•
You can save the parameter set of an application.
– Four parameter sets are available, so that the controller can be adjusted rapidly from one
application to another.
– When delivered, the parameter sets have the factory-set default values.
Ways of parameter setting
Parameters can be changed through:
•
A keypad
•
A superimposed host (PC or PLC) via fieldbus modules and operating programs.
Parameter setting
Parameter setting using the keypad