Otto Bock Genium X3 Series Patient Information page 20

4� The font size in the menu bar can be changed by selecting "Zoom"�
5� � 6� P ress on the screen to set the font to normal (1, ) or large (2, ) and then press the
enter enter button to confirm�
7�
Prosthesis Administration
Connections with up to four different prostheses can be stored in a single remote control� Conversely,
a prosthesis can only be connected to a single remote control� Complete the following steps to add
additional connections:
1� Use to select "RC Settings" from the main menu and confirm using the enter button�
2� Select "Pairing" from the menu that appears�
3� The remote control searches for additional prostheses within range�
4� Use the enter button to confirm once another prosthesis has been found� If several additional
prostheses are found, the serial number of the desired prosthesis has to be selected using the
navigation keys (display: serial number)� Use to select one of the four positions and confirm
with the enter button� One of the existing connections can also be overwritten� The configuration
files are loaded from the prosthesis and the main menu is displayed�
To delete an existing connection, please follow the steps below:
1� Use to select "RC Settings" from the main menu and confirm using the enter button�
2� In the menu that appears, select "Delete connection" and confirm using the enter button�
3� Select the connection you wish to delete using and confirm with the enter button�
20 | Ottobock
Information about the firmware version of the knee joint and signal
strength is accessible under „Info"� Select the arrow symbol to return
to the main menu on the display�
Genium X3 - Bionic Prosthetic System