Table of Contents
Advertisement
Friction brake mode
Slider name in X-Soft
Basis
Pitch
Volume
Deep sleep mode
The remote control can be used to place the knee joint in a deep sleep mode, in which power con-
sumption is minimised� The knee joint offers no functionality in this mode�
It can be awakened from deep sleep mode with the remote control or by connecting the charger�
Proceed as follows to activate deep sleep mode:
1�
2�
3� A confirmation prompt is displayed� Press the enter button again�
Proceed as follows to wake the knee using the remote control:
1� Activate the remote control by pressing the enter button and �
2� Select the "Device Power on" menu entry and press the enter button to confirm�
3� The knee joint is reactivated after no more than 20 seconds, which is confirmed by a single beep
and vibration signal� It will then be in basic mode�
Alternatively, the knee joint can be woken by connecting the charger�
18 | Ottobock
Absolute Range
Remote control
Adjustment Range
0-180
±20
1000 Hz –
1000 Hz –
4000 Hz
4000 Hz
0 – 4
0 – 4
Select „Device Settings" in the main menu and confirm the selection�
A list of the parameters available for the current MyMode is displayed�
The entry „Deep sleep" is at the end of this list; select it and press
the enter button�
Description
Basic resistance for the knee joint
without load
Frequency (pitch) of the beeper for
confirmation signals�
Volume of the beeper for confirmation
signals�
Genium X3 - Bionic Prosthetic System
Advertisement
Table of Contents
