Otto Bock Genium X3 Series Patient Information page 15

INFORMATION
The range of the remote control is max� 5 meter�
Control Elements of the remote control
3
1� LCD screen
2� Enter button
3� Navigation keys: Left , right , up , down
4� Charging receptacle
Initial Connection Between the remote control and the knee joint (Pairing)
1� Turn on the remote control by pressing the enter button� The start-up screen with the date, time
and battery capacity of the remote control is displayed� Without additional input, the remote control
turns off automatically after 5 seconds�
2� Attempt to establish a connection by pressing � The remote control searches for active prostheses�
3� When a knee joint is found (serial number is displayed), confirm by pressing the enter button�
If several knee joints are found, the serial number of the desired knee joint has to be selected
using the navigation keys (display: serial number)� Then the configuration data are downloaded
from the knee joint�
INFORMATION
This process can take a few minutes�
4� The main menu is displayed�
After the initial connection to the knee joint has been established successfully, the remote control
will connect automatically each time it is turned on (enter button followed by )� No further steps
are required�
Genium X3 - Bionic Prosthetic System
1
2
3
4
Ottobock | 15