ComAp InteliLite MRS16 Manual page 521

AIN Prot 06
Related FW 1.2.1
Comm object 9994
Description
Logical analog input designed for general value received from analog sensor. For more information about
wiring of analog inputs see Analog inputs on page 33. Limits for this protection are adjusted by setpoints
Analog Protection 6 Wrn (page 217)
Analog Protection 6 Delay (page
Protection types
Monitoring
HistRecOnl
Wrn
Wrn + BOC
BOC
Wrn + Sd
Sd
Note: This parameter has to be adjusted via LiteEdit2015.
Alarm
Under limit
Over limit
Under limit + fls
Over limit + fls
Example: Protection type is Wrn + Sd. When sensor fail is detected then Sd alarm will be activated +
Sensor fail alarm will be activated.
Note: This parameter has to be adjusted via LiteEdit2015.
6 back to Logical analog inputs alphabetically
InteliLite Global Guide
Related applications
and Analog Protection 6 Sd (page
218).
Analog value is only measured and displayed on the LCD screen but not used for
protection.
Analog value is only measured and displayed on the LCD screen but not used for
protection. History record is made if value is out of the limits.
Analog value is used for warning protection only.
Analog value is used for warning and BOC (Breaker Open and Cooling) protection.
Analog value is used for BOC (Breaker Open and Cooling) protection.
Analog value is used for warning and shutdown protection.
Analog value is used for shutdown protection.
Alarm is activated when value of analog input is under adjusted limits
Alarm is activated when value of analog input is over adjusted limits
Alarm is activated when value of analog input is under adjusted limits. If sensor fail
is detected then the alarm with higher level is activate as well.
Alarm is activated when value of analog input is over adjusted limits. If sensor fail
is detected then the alarm with higher level is activate as well.
AMF, MRS
218). Delay is adjusted by setpoint
521