ComAp InteliLite MRS16 Manual page 454

Fuel Level
Related FW 1.2.1
Comm object 626
Description
Binary input for F L
UEL
Protection types
Monitoring
HistRecOnl
Wrn
BOC
Sd
6 back to Logical binary inputs alphabetically
Fuel Pump On/Off
Related FW 1.2.1
Comm object 694
Description
This binary input is used for manual control of binary output
Note: This binary input is basically designed for ON and OFF switch (switch with arrestment in these
positions) because controller reacts to rising and falling edge of signal in this input.
IMPORTANT: When binary input
output F P
UEL UMP
Fuel Pump Off (page 187)
and
6 back to Logical binary inputs alphabetically
LBI: G
GCB Button
Related FW 1.2.1
Comm object 193
Description
Binary input has the same function as GCB button
mode only.
6 back to Logical binary inputs alphabetically
InteliLite Global Guide
Related applications
( 544) protection.
EVEL PAGE
Binary input is not used for protection or any other function. Signal is only
monitored.
Binary input is not used for protection. Only history record is made if binary input is
active.
Binary input is used for warning protection only.
Binary input is used for BOC (Breaker Open and Cooling) protection.
Binary input is used for shutdown protection.
Related applications
F
UEL
( 493) is control by this binary input. Setpoints
PAGE
are not evaluated!
Related applications
F P (
UEL UMP PAGE
P O /O ( 454)
UMP N FF PAGE
on the InteliLite front panel. It is evaluated in MAN
AMF, MRS
AMF, MRS
493).
is configured then binary
Fuel Pump On (page 186)
AMF, MRS
454