Measures For Preparation; Unpacking; Transporting And Lifting; Storage - Samson 611 Mounting And Operating Instructions

4 Measures for preparation

After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Compare
the shipment received with the delivery
note.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent
(refer to delivery note).

4.1 Unpacking

Î Do not remove the packaging until im-
mediately before installation.
Î Dispose of the packaging in accordance
with the valid regulations.

4.2 Transporting and lifting

Transport instructions
− Protect the device against external influ-
ences (e.g. impact).
− Protect the device against moisture and
dirt.
− Observe the permissible ambient tem-
peratures (see section 3.2).
EB 6116 EN
Measures for preparation

4.3 Storage

NOTICE
!
Risk of device damage due to improper
storage.
Î Observe the storage instructions.
Î Contact SAMSON in case of different
storage conditions.
Storage instructions
− Protect the device against external influ-
ences (e.g. impact).
− Protect the device against moisture and
dirt. Store it at a relative humidity of less
than 75 %. In damp spaces, prevent con-
densation. If necessary, use a drying
agent or heating.
− Make sure that the ambient air is free of
acids or other corrosive media.
− Observe the permissible ambient tem-
peratures (see section 3.2).
− Do not place any objects on the device.

4.4 Preparation for installation

Î Check the device for damage.
Î Check the connections to make sure they
are clean.
25