Samson 611 Mounting And Operating Instructions page 6

Safety instructions and measures
Personal protective equipment
SAMSONWe recommend checking the hazards posed by the plant and the process medium
being used (e.g. u GESTIS (CLP) hazardous substances database).
Î Provide protective equipment (e.g. safety gloves, eye protection) appropriate for the ma-
terial safety data sheet.
Î Check with the plant operator for details on further protective equipment.
Revisions and other modifications
Revisions, conversions or other modifications of the product are not authorized by SAMSON.
They are performed at the user's own risk and may lead to safety hazards, for example. Fur-
thermore, the product may no longer meet the requirements for its intended use.
Warning against residual hazards
To avoid personal injury or property damage, operators and operating personnel must pre-
vent hazards that could be caused in the device by the process medium and operating pres-
sure by taking appropriate precautions. They must observe all hazard statements, warning
and caution notes in these mounting and operating instructions, especially for installation,
start-up and service work.
Responsibilities of the operator
The operator is responsible for proper operation and compliance with the safety regulations.
Operators are obliged to provide these mounting and operating instructions as well as the
referenced documents to the operating personnel and to instruct them in proper operation.
Furthermore, the operator must ensure that operating personnel or third persons are not ex-
posed to any danger.
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the referenced documents and observe the specified hazard statements, warnings
and caution notes. Furthermore, the operating personnel must be familiar with the applicable
health, safety and accident prevention regulations and comply with them.
Referenced standards and regulations
Devices with a CE marking have an EU declaration of conformity, which includes information
about the applied conformity assessment procedure. The EU declaration of conformity is in-
cluded in the annex of these instructions (see section 10.2).
6 EB 6116 EN