Samson 611 Mounting And Operating Instructions page 50

Physikalisch-Technische Bundesanstalt
Braunschweig und Berlin
EC TYPE EXAMINATION CERTIFICATE
(1)
(2)
Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres -
Directive 94/9/EC
(3) EC Type Examination Certificate Number
(4) Equipment:
(5) Manufacturer:
(6) Address:
(7) This equipment and any acceptable variation thereto is specified in the schedule to this certificate
and the documents therein referred to.
(8) The Physikalisch-Technische Bundesanstalt, notified body number 0102 in accordance with
Article 9 of the Council Directive 94/9/Ex of 23 March 94, certifies that this equipment has been
found to comply with the Essential Health and Safety Requirements relating to the design and
construction of equipment and protective systems intended for use in potentially explosive
atmospheres given in Annex II to the Directive.
The examination and test results are recorded in confidential report: No. PTB Ex 98-17013.
(9) Compliance with the Essential Health and Safety Requirements has been assured by compliance
with
EN 50014:1997
(10) If the sign "X" is placed after the certificate number, it indicates that the equipment is subject to
special conditions for safe use specified in the schedule to this certificate.
(11) This EC TYPE EXAMINATION CERTIFICATE relates only to the design and construction of
the specified equipment. If applicable, further requirements of this Directive apply to the
manufacture and supply of the equipment.
The results laid down in this test report refer exclusively to the test object and the technical documentation submitted. Test reports without signature
and seal are invalid. This test report may be reproduced unaltered only. Extracts or amendments shall require the prior approval of the Physikalisch-
Physikalisch-Technische Bundesanstalt – Bundesallee 100 - D 38116 Braunschweig
Ptb.EC-6116-2.doc
T R A N S L A T I O N
PTB 98 ATEX 1024 X
Model 6116-2 i/p-Converter
SAMSON AG Mess- und Regeltechnik
Weismüllerstr. 3
D-60314 Frankfurt am Main
EN 50018:1994
Technische Bundesanstalt.